How To Reset Furnace Fan. How to find and reset your furnace motor blower step 1: Lift up the blower compartment cover to access the blower wheel and blower motor.
Without a model number, i am only guessing here; Pull out the white switch to reset the limit control to automatic. But if the fan will run, we have power.
Table of Contents
If So, Replace The Access Panel.
Remove the blower compartment cover. All furnaces are equipped with a reset button. Set the markers to the appropriate settings for your furnace.
You Can’t Miss It.obviously, I Did Miss It.
Finally, switch on the furnace to see if resetting the furnace blower motor solved the original problem. This is usually on the side or the back of the blower motor. After that, switch back power at the breaker.
When The T'stat Tells The Furnace To Stop, The Burner Stops But The Fan Continues To Cool Off The Heat Box Then Shuts Down.
Put the compartment cover back on. Press the button in (assuming that this is your issue and that the button has popped). Where is the reset bu.
Look At The Control Panel On Your Furnace.
How to find and reset your furnace motor blower step 1: If you can’t easily find the reset button or your owner’s manual for help, the best option is to turn off the circuit breaker that controls it, then restart power to the furnace by. With your furnace’s electrical components still off, remove the panel by either lifting it out of the slot, or pinching.
Turn Off The Power To The Furnace.
Hello, there is typically not a reset button on furnaces. On the front of your furnace, there is a removable panel. If the breaker panel control is engaged (flipped up) as it should be, then go to your furnace and power it down.