How To Turn On Sprinkler System Youtube 2. The controller is what tells the sprinklers to turn on in the first place. Slowly open the main shutoff valve to let water into the sprinkler system.
Turning water on for broken or poorly maintanenced equipment is an easy way to risk long term damage to your system, even if the temperature. There are many reasons why a sprinkler system might not turn on, and we can take care of them all. The location of your sprinkler system:
Table of Contents
Turn Off The Water To The Sprinkler System 2.
After you’ve finished checking the first system, let the time run out or shut off the system manually by turning the dial to “system off.” then, switch back to the “manual one station” position and use the left and right arrow. This way you don’t have to run back and forth between the timer/controller and the zone you are watering. There are many reasons why a sprinkler system might not turn on, and we can take care of them all.
This Should Turn Open The Valve, And Turn On The Sprinklers.
Listen again, if it runs for a bit then gets quiet you are ready to proceed. Clear at least 7 inches of dirt around the pipe the entire length of. Unscrew the solenoid located on the top of the valve and wait for the excess water to drain 3.
Once Your Lawn Sprinkler System Has Been Turned Off, Give Us A Call!
Steps for properly activating a sprinkler system: But, if the sprinklers won’t turn on it can be a real hassle and it can have a dramatic effect on your lawn and plants. If you follow the above steps, reset your system if your rain bird test all stations are not working.
If You Can't Get The Instructions For Your Brand Of Sprinkler, Get Instructions For Other Brands.
Insert the hunter key in the adjustment socket. This is possible because most control boxes contain a small amount of flash memory, which retains data about watering schedules. Wait 30 seconds or 10 minutes and reconnect the power.
Follow The Path Of The Supply Lines From Sprinkler Head To Sprinkler Head, And Finally To The Manifold At The Irrigation Control Box.
If the problem still remains after the above procedures, replace the sprinkler heads. Slowly open the main shutoff valve to let water into the sprinkler system. Close the valve (if that’s the case) and go turn the water back on.